Bio-Glass Countertops are made from 100% recycled glass, and is fully recyclable. The slabs resemble translucent sea glass, with a natural satin finish and a slight texture. Bio-Glass is
non-tempered glass, allowing for custom fabrication.
Slabs may be used for Counter-and worktops, accent walls and flooring.The natural finish is satin with a slight texture. Light colors allow light to shine through.This product is not tempered.
SIZES
Available in Slab only.
49” x 110” x 3/4” thick
Click here to download a cutsheet
Bio Glass Specifications Sheet
Material Safety Data Sheet
|
|
|
Fossil Amber
110"49"x3/4" |
|
|
Oriental Jade
110"49"x3/4" |
|
White Diamond
110"x49"x3/4" |
|
Specifications
TEST PERFORMED
|
RESULTS
|
DIN
|
Dimensions
Maximum panel size
|
2800 x 1250 [mm], thickness 20/23 [mm]
|
|
Dimensional tolerances
Dimensions
|
±1,20 [mm]
±1,00 [mm] high polish
|
|
Specific gravity
|
Approx. 2,4 [g/cm2]
|
|
Weight per m2
with 20mm thickness
|
Approx. 60,00 [kg]
|
|
Bending strength
Characteristic value
5% fractile
|
Approx. >22 [N/mm2]
|
DIN 52112
|
Tearing strength attachment point
{anchors attached to the rear from the
firm of Keil, placement depth 13 mm}
|
Approx. 3,2 [KN] {average value}
|
|
Elasticity module
|
Approx. 57 [kN/mm_] average value
|
|
Hardness (According to Mohs)
|
6
|
DIN EN 101
|
Heat expansion 20-100ºC
|
7,95 [10-6/K]
|
DIN EN 103
|
Heat conductivity at 64ºC
|
1,04 [W/m K]
|
|
Specific heat capacity Cp
|
0,7 [J/g K]
|
|
Water absorption
|
< 0,1 [Ma.-%]
|
DIN EN 99
|
Frost resistance
|
No trials with visible defects
|
DIN EN 202
|
Stain resistance
|
Class 1
|
DIN EN 122
|
Chemical resistance
|
Class AA
|
DIN EN 122
|
Acid resistance
|
Class AA
|
DIN EN 122
|
Caustic resistance
|
Class A
|
DIN EN 122
|
Fire class
|
Class A
|
DIN 4102
|
Surface wear
|
Class II, 300 revolutions
|
DIN EN 154
|
Slip resistance
|
No test for polished
|
DIN 51130
|
Surface area
|
High polish
|
|
Surface properties
|
Closed surface, therefore easy cleaning with all
traditional cleaning agents and solvents
|
|
Edge finish
|
all panels are supplied with facetted edges
|
|
Application / processing
|
Flooring, Wall Details, Counter and Worktops
|
|
Finish
|
Bio-Glass ceramics can be sawn and drilled
with water-cooled diamond tools at the construction site
|
|
Environment
|
Bio-Glass ceramics is 100% recyclable
|
|
Material Safety Data Sheet
Section I – Product Identification
| Trade Name: |
Bio-Glass™ |
|
| |
|
|
| Chemical Name & Family: |
N/A |
|
| |
|
|
| Formula: |
100% Glass |
|
| |
|
|
| HMIS Hazard Index |
Health |
1 |
| |
Flammability |
0 |
| |
Reactivity |
0 |
| |
Personal Protection |
A |
Section II – Hazardous Ingredients
Bio-Glass does not contain hazardous ingredients
Section III – Physical & Chemical Characteristics
Glass is made of almost 100% crystalline silica in the form of quartz containing 70-72% weight % silicon dioxide.
Bio-Glass consists of 100% recycled glass. Bio-Glass colors depend on recycled components (hollow glass, tableware, and/or factory shards).
Section IV – Fire and Explosion Hazard Data
Bio-Glass materials are stable.
Section V – Health Hazard Data
Sanding, sawing or grinding may result in the release of dust particles which may cause irritation of the eye or nose or, with excessive long term exposure cause lung disease.
Symptoms:
Skin: Dryness, and/or irritation
Inhale: Shortness of Breath or Irritation of Nose
Eyes: Irritation
First Aid:
Skin – wash with soap and water
Inhale – remove to fresh air
Eyes – rinse with fresh water
If any symptoms persist, see a physician
Section VI – Reactivity Data
Bio-Glass materials are non-reactive.
When burned, no known hazardous by-products are emitted.
Section VII – Precautions for safe handling & use
Not considered hazardous waste.
Section VIII – Control Measures
Wear NIOSH approved HEPA respirators and safety glasses when sanding, sawing or grinding the material. Ventilation is required in confined areas where large amounts of dust will accumulate
Dust Control Equipment recommended.
Disclaimer: The data herein presented is made available solely for the consideration of the recipients and does not constitute a representative or warranty for which Coverings ETC assumes responsibility. It is the responsibility of the recipient to remain informed on Chemical Hazard Information and to design its own program and to comply with all federal, state and local laws and regulations applicable.
|
